| page 1 - next page |
Type
|
Products
|
Range of performance
|
Applications
|
Download
|
IP
|
|
Flow rate up to 50 l/min
(3.0 m3/h)
Head up to 90 mm |
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. For their reliability, simplicity of use and economy they are suitable for domestic use and in particular for distributing water in combination with small pressure sets, for irrigating gardens.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
IQ
|
|
Flow rate up to 50 l/min
(3.0 m3/h)
Head up to 90 m |
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made.
The hydraulic characteristics of these pumps, together with their compactness, make them suitable for use in the industrial sector. The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
IC
|
|
Flow rate up to 160 l/min
(9.6 m3/h)
Head up to 58 m
|
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
Reliable and maintenance free they are widely used in the domestic and civil sector, in particular for water distribution in combination with small or medium pressure sets, for transfer in general, for irrigating gardens. The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
IC-SS
|
|
Maximum flow rate 160 l/min
(9.6 m3/h)
Maximum head 23 m |
It is recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. The construction of these centrifugal pumps makes them suitable for use in the domestic, agricultural and industrial sector. All the wetted parts are in stainless steel AISI 304 to guarantee total hygiene and maximum resistance to corrosion.
The pump must be installed in enclosed places, or at least protected against inclement weather. |
|
ICn
|
|
Flow rate up to 250 l/min
(15 m3/h)
Head up to 57 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
The pumps in this series are made to standards EN 733 - DIN 24255 and are specifically used in the civil, industrial or agricultural sectors where their characteristics of sturdiness and reliability can be best appreciated.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
ICH
(medium flow rates)
|
|
Flow rate up to 600 l/min
(36 m3/h)
Head up to 39 m |
The ICH series is recommended for civil, agricultural and industrial applications. The high flow rates and continuous rating make it ideal for irrigation with flowing and sprinkling water, for drawing water from lakes, rivers, wells, or for industrial applications that need to achieve large flow rates at medium-low heads.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
ICH
(high flow rates)
|
|
Flow rate up to 1800 l/min
(108 m3/h)
Head up to 24.5 m |
The ICH series is recommended for use in the civil, agricultural and industrial field. The high flow rates and continuous rating make it ideal for irrigation with flowing and sprinkling water, for drawing water from lakes, rivers, wells, or for industrial applications that need to achieve large flow rates at medium-low heads.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
NCO
|
|
Flow rate up to 350 l/min
(21 m3/h)
Head up to 20 m |
They are recommended for pumping water and liquids that are chemically non aggressive to the materials from which the pump is made. The open impeller design allows the pumping of liquids with relatively high levels of impurities without risk of clogging the impeller. For this reason the NCO series are suitable for use in industry, for the transfer of water from canals, rivers, reservoirs, tanks, etc. The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
PRO-NCO
|
|
Flow rate up to 350 l/min
(21 m3/h)
Head up to 20 m
|
They are recommended for pumping water and liquids that are chemically non aggressive to the materials from which the pump is made. The open impeller design allows the pumping of liquids with relatively high levels of impurities without risk of clogging the impeller. For this reason the PRO-NCO series are suitable for use in systems for washing fruit, vegetables, fish, shellfish, meat, in industrial systems for washing metal parts, glass containers, and for the circulation of cooling liquids.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
ICB
|
|
Flow rate up to 400 l/min
(24 m3/h)
Head up to 112 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
Their high efficiency and adaptability to the most varied, even unusual applications, make them the ideal choice in the domestic, civil and industrial field; in particular for distributing water in combination with pressure sets, for increasing pressure in the mains, for fire-fighting sets.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
MSG
|
|
Flow rate up to 130 l/min
(7.8 m3/h)
Head up to 47 m
|
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
Due to their reliability, quiet running and low maintenance, they are suitable for domestic applications including water supplies (as a pressure set), garden irrigation, etc. The pumps must be installed in enclosed places, or at least protected against inclement weather |
|
MS 07-08
|
|
Flow rate up to 120 l/min
(7.2 m3/h)
Head up to 50 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
Due to their reliability and quiet running, they are suitable for domestic applications including water supplies (as a pressure set), garden irrigation, etc.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
