| back page - page 2 |
Type
|
Products
|
Range of performance
|
Applications
|
Download
|
VMS A
|
|
Flow rate up to 80 l/min (4.8 m3/h) Head up to 105 m
|
They are recommended for pumping clean water and liquids that are che-mically non aggressive to to the materials from which the pump is made. Their reliability and quiet running make them suitable for domestic and civil applications, because the pump is fully submersible with the motor cooled by the pumped liquid, it can be used safely in wet environments and in spaces with insufficient ventilation. |
|
VMS B
|
|
Flow rate up to 120 l/min (7.2 m3/h) Head up to 105 m
|
They are recommended for pumping clean water and liquids that are chemi-cally non aggressive to the materials from which the pump is made.Their reliability and quiet running make them suitable for domestic and civil applications, because the pump is fully submersible with the motor cooled by the pumped liquid, it can be used safely in wet environments and in spaces with insufficient ventilation. |
|
VMSE A
|
|
Maximum flow rate 80 l/min (4.8 m3/h) Head up to 105 m
|
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. Their reliability and quiet running make them suitable for domestic and civil applications and, because the pump is fully submersible with the motor cooled by the pumped liquid, it can be used safely in wet areas and in spaces with insufficient ventilation. The enclosed design also eliminates the possibility of water escaping as a result of seal failure, making it suitable for use in carpeted or other delicate environments |
|
VMSE B
|
|
Maximum flow rate 120 l/min (7.2 m3/h) Head up to 105 m
|
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. Their reliability and quiet running make them suitable for domestic and civil applications and, because the pump is fully submersible with the motor cooled by the pumped liquid, it can be used safely in wet areas and in spaces with insufficient ventilation. The enclosed design also eliminates the possibility of water escaping as a result of seal failure, making it suitable for use in carpeted or other delicate environments. |
|
JS
(up to 0.85 HP)
|
|
Flow rate up to 50 l/min
(3 m3/h)
Head up to 47 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JS self-priming pumps are designed for suction lifts and can be positioned above the water source, including applications with air entrained in the water. Due to their reliability and low maintenance, they are recommended for domestic use, including water distribution (as part of a pressure set), garden irrigation, etc.
The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
JS
(from 1 to 1.5 HP)
|
|
Flow rate up to 80 l/min
(4.8 m3/h)
Head up to 70 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JS self-priming pumps are designed for suction lifts and can be positioned above the water source, including applications with air entrained in the water. Due to their reliability and low maintenance, they are recommended for domestic use, including water distribution (as part of a pressure set), garden irrigation, etc. The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
JSE
(from 1.5 to 3 HP)
|
|
Flow rate up to 160 l/min
(9.6 m3/h)
Head up to 96 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JSE self-priming pumps are designed for suction lifts and can be positioned above the water source, including applications with air entrained in the water. Due to their reliability and low maintenance, they are recommended for domestic use, including water distribution (as part of a pressure set), garden irrigation, etc. The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
JET-SS
|
|
Flow rate up to 80 l/min
(4.8 m3/h)
Head up to 72 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JET-SS self-priming pumps are designed for suction lifts and can be positioned above the water source, including applications with air entrained in the water. Due to their reliability and low maintenance, they are recommended for domestic use, including water distribution (as part of a pressure set), garden irrigation, etc. The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
K
|
|
Flow rate up to 6000 l/min
(360 m3/h)
Head up to 95 m |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
This series is suitable for supplying and moving water, in cooling, heating, circulating and conditioning systems, for fire fighting, irrigation, industrial and agricultural applications. Manifacture in accordance with dimensional standards EN 733 - DIN 24255 ensures models are fully interchangeable.The design allows the pump body to be removed without disconnecting it from the pipes (back pull out). The pumps must be installed in enclosed places, or at least protected against inclement weather. |
|
UTILITY
|
|
Flow rate up to 50 l/min
(3 m3/h)
Head up to 47 m |
Portable self-priming pumps capable of clearing entrained air from the suction pipe.
Recommended for gardening, vegetable gardens, washing and hobby applications they are suitable for use with any liquids compatible with the materials of construction. |
|
PC PUMP
|
|
|
Domestic pumps with a pressure sensing electronic controller for automatic operation; the pump operates as required as a tap is opened or closed. The controller also provides protection for the pump against dry running. |
|
BOOSTER SETS
|
|
|
Small pressure sets with vessel, for automatic operation. Suitable for the supply of pressurised water in the home or in holiday homes. |
|
